Modified epoxy repair mortar 
 Feature 
 With impermeability, frost, salt, alkali, weak acid corrosion resistance performance, and the cohesive force of a strong variety of materials. 
 (2) the coefficient of thermal expansion close to the concrete, it is difficult to disengage from these substrates to be bonded, and good durability. 
 (3) in wet substrate surface construction, without drying, hardening in wet conditions or underwater. 
 Flammable, not explosive, does not pollute the environment, harmful to human health. 
 (5) low cost, only 30-50% of epoxy resin mortar. 
 6 easy construction, similar to ordinary cement mortar construction, easy to clean, the water can be cleaned. 
 Applicable 
 (1) fire-resistant, high temperature, cellular, vulnerability and exposed tendons and other defects in concrete structures surface. 
 Two concrete structures, stair step corrupted patch. 
 3 stick of steel reinforcement and sticky carbon fiber reinforcement to do the bottom leveling. 
 (4) can be used as sea water, saline areas, and chemical plants and other corrosive environments, corrosion-resistant materials. 
 Typical performance indicators 
 Flexural strength, MPa, 28d: 8.1 
 Compressive strength, MPa 28 d: 40.9 
 Bond strength of 28 days MPa: 1.49 
 Alkali resistance: saturation of Ca (OH) 2 solution, 168h without cracking, spalling 
 Heat resistance: 100 ° C water, 5h: No cracking, spalling 
 Freeze-thaw cycle (-15 ° C -20 ° C), 25: No cracking, spalling 
 Use 
 A. Check the product packaging is intact, label verification. 
 Two. Open the lid, bucket bags marked A, B, and C, pre-batching remove. 
 3. A material B material shake, were poured into the bucket and stir evenly, and then marked with a "C" powder and stir into the barrel while slowly stirred into a uniform mortar-like can. 
 4. If the mixture more viscous or difficult to Stir, this package can be added to clean water and stir in 1-2kg, does not affect the final performance of this product. 
 Note 
 A. This product is cement-based materials, the fully hardened for 28 days. 24 hours using this product can be the next process. 
 Two. Marinated epoxy mortar should be used up within two hours, this time thickens to dry conditions can be added to the appropriate water Stir well before use. 
 Packaging and storage 
 A. The packaging of the product specifications of 20kg / barrel. 
 Two. Unopened shelf life of 12 months, beyond the shelf life shall be subject to inspection before it can continue to use.