E-type polymer waterproofing mortar waterproof glue 
 Feature 
 A one-component white liquid. 
 Live Serve polymer waterproof mortar with cement, sand preparation. 
 Wet surface construction, non-toxic, odorless, and is a green product. 

 Advantage 
 An excellent crack resistance. 
 Good water impermeability. 
 Good adhesive properties. 

 Composition 
 A variety of polymer emulsion and additives. 

 Recommended for 
 (1) water conservancy and hydropower, tunnels, bridges, subway project. 
 (2) waterproof moisture of the granary, kitchen, basement, pool and other concrete surfaces. 
 3 for high-grade highway pavement repair. 

 Typical performance indicators 

 Construction 
 (1) clean up cleaning grass-roots, grass-roots should be solid, the surface free from dust, oil, pre-construction rinse with water again. 
 Two ingredients: polymer cement waterproof mortar ratio: 

 Spices: measurement of a good cement, sand, stir, then add the measurement of good polymer waterproof glue and water mixture, Stir is a waterproof polymer mortar. 
 4 Construction: In the handling good base surface (wetting without water) to wipe the polymer waterproof mortar, a total wipe twice each over the thickness of 8 ~ 10mm. Such as grass-roots level is too light or the old surface should be painted again the interface agent. The ratio of interfacial agent: E-type waterproof glue: cement: water = 0.1:1.5:1. 
 Conservation: moisture conservation seven days, seven days after the natural conservation. 

 Amount of reference: coating thickness 20mm, about 1kg/m2. 

 Note 
 Waterproof mortar marinated, after the initial setting of the mortar can not add water reuse. 

 Packaging and storage 
 Packing: plastic drum, 25kg / barrel; 
 Stored in a dry ventilated place, the storage temperature should be above 0 ℃; 
 Shelf life: 12 months.