Transparent waterproofing agent 
 DM-1000 
 Advantage 
 A one-component water-based white liquid, openings can be used to facilitate construction, with low, low cost. 
 Good permeability, alkali resistance, water resistance, water-repellent, breathable impermeable to prevent the erosion of acid rain on buildings. 
 Construction does not change the color of the original grass-roots level, the surface is not easy sticky gray and difficult to fade, anti-concrete surface weathering. 
 Recommended for 
 (1) the external walls of buildings (strengthening, concrete, mortar and other non-water impermeable coating on the surface). 
 Wood, doors, window frames, stone, cement board and other absorbent materials hydrophobic, water-resistant. Toilet water, wall waterproofing, tile water 
 Typical performance indicators 
 Appearance: Opaque liquid 
 Density (25 ° C): 1.01 ~ 1.02g/cm3 
 PH: 13 
 Solvent: water 
 Flash point: not burning 
 Use 
 (1) clean up clean the base surface, if cracks or holes, you should use this waterproofing agent with cement sand patch formation of dense, if leakage should be plugging; 
 Brushing with a brush or low pressure spray device spraying the surface of the base two times more than 30min interval can also be mixed with cement mortar; 
 (3) the wet surface construction to ensure full coverage, if necessary, repeat the brushing. 
 Reference to the amount of 4 - 8 m / L 
 Packing: plastic barrel, 500ml / bottle, 5 kg / barrel;