Waterproof coating for concrete 
 DM-110 
 Advantage 
 An organic liquid and inorganic powder composed of two-component water-based waterproof coatings. 
 (2) non-toxic, tasteless, does not burn, is a green product. 
 3 in saturated wet to dry a variety of surface of the base construction. 
 4 based on the engineering preparation of the color coating. 
 Recommended for 
 An underground engineering, sinks, baths and other occasions require long-term water resistance. 
 2 bathroom, kitchen, balcony, ground water. 
 Water and surface defects of the tunnels, bridges, reservoirs, mines and other projects. 
 Drinking water, pool water, reservoir water, concrete waterproofing, swimming pool water 
 Typical performance indicators 
 Ⅰ: 
 Solid content ≥ 65% 
 Tensile strength ≥ 1.2MPa 
 Elongation at break ≥ 200% 
 Low temperature flexibility (Φ10mm stick): -10 ° C, no crack 
 Impermeability (0.3MPa, 30min): impervious 
 Ⅱ: 
 Solid content ≥ 65% 
 Tensile strength ≥ 1.8MPa 
 Elongation at break ≥ 80% 
 Impermeability (0.3MPa, 30min): impervious 
 Use 
 A grass-roots: the base surface should be smooth, solid, clean, ignorance of water, no leakage, the yin and yang should be made of the arc angle angle. If leakage can be the first to use the impermeability of the Company's production on the 1st (plugging Type). 
 Brushing primer: base surface wetting, brushing Primer ratio: liquid material: powder: water = 1:1.5:0.5. 
 Detail treatment: painted primer surface detail processing (eg, Yang angle, the nozzle should be strengthened to the site), the first waterproof glue and painted again, a layer of non-woven glass fiber mesh. waterproof glue to cover it again. 
 4 brushing the painted or coated table: liquid material with powder Stir the ratio of 1:1.5, the mixing time of not less than five minutes (preferably using electric mixer) and then layered brushing, layers begin construction time previous layer coating dry to a sticky subject, should be perpendicular to the direction of the upper and lower coating. 
 Amount of reference: the film thickness of 1 mm, with about 2.0kg/m2. 
 Packing: powder: carton, 5kg / bag, 25kg / box; liquid material: plastic drum, 50kg / barrel;