External walls of transparent waterproof coating 
 DM-120 
 Advantage 
 The coating has excellent film-forming properties, the film is bright and dense; 
 The film has a one-way permeability within the base surface moisture outward evaporation without bubbling, can prevent the entry of external water molecules and gas molecules, but impermeable 
 3 coating is colorless, transparent coating will not destroy the original base surface effect, the same yellow, non-stick dust, no pollution, the same black; 
 Easy construction, safe operation, brushing or spraying, tools for easy cleaning. 
 Recommended for 
 A variety of concrete structures surface protection, waterproof and carbonation; 
 (2) the external walls of buildings surface water moisture mildew; 
 3 a variety of external walls of the building surface seepage waterproofing; 
 4 color plates and roof waterproofing layer overlays; wall waterproofing, wall plugging the external walls of impermeable, waterproof wall tile 
 DM-120-I type with strong permeability, can be used for the absorbent base surface; 
 The DM-120-II-type non-absorbent base surface. 
 Typical performance indicators 
 Appearance: milky white viscous liquid 
 Density, g/cm3: 1.02 ~ 1.06 
 Solid content,%: 48 ± 2 
 Appearance of the coating: clear, transparent 
 Impermeability 0.3Mpa, 30min: impervious 
 Use 
 A first construction of the base surface to clean, no grease, dust and other impurities, defects at the first patch; 
 The gap between the tiles should be dense, and may not have a break if interrupted first the impermeability One (retarding) fixed; 
 First transparent waterproof paint brushing twice tile construction gap, wait until the construction of the dry film and then a large area; 
 4 prior to use transparent waterproof coating Stir well and can be painted in the construction, the proposed construction from top to bottom, left to right 
 Pass dry film, painted a second time, according to the construction requirements to determine the number of brushing times, general brushing twice is appropriate; 
 If the water absorption of the base surface, should be coated with primer, primer can be used this material plus 30% water Stir, brushing again, dried and then coated with the DM-120. 
 Dosage: 0.2 ~ 0.3kg / ㎡ 
 Packing: plastic drum: 16 kg / barrel