Reactive cement waterproof coating of polymer elasticity 
 DM-340 
 Feature 
 A polymer elastic fluid materials, cement-based powder, add water, room temperature reaction curing. 
 High strength, wear resistance, good flexibility. 
 3 applies to the concrete surface water seepage, use the positive side. 
 Non-toxic, non-tar asphalt, solvent can be used for drinking water projects. 
 Recommended for 
 A building basement bathroom walls to waterproof, moisture, seepage and cracks repair. 
 (2). Potable water pool, swimming pools, water-resistant. 
 Of Hydraulic and Electric Engineering, reservoirs, dams, tunnels, bridges, mines and other waterproof and repair. 
 Building expansion joints, construction joints, settlement joint and nozzle perfusion seal and cast water stop. 
 Typical performance indicators 
 Tensile strength: 3.8 ~ 4.0 Mpa 
 Elongation at break: 350 ~ 400% 
 Flexibility: low temperature and low temperature flexibility -30 ℃ 
 Impermeability, 0.3Mpa, 30min, impervious 
 Use 
 The grassroots level to prepare: the structural integrity of the primary surface, solid, clean, free of loose debris, no oil. If leakage can be used to repair the DM-410 impermeability One (plugging Type). 
 Primer: DM-210 wet-based surface sealer, primer should be painted uniform, not leakage Tu; can be directly used the paint for primer. 
 Standard ingredients: the ratio of powder: water: liquid = 1:0.3:1, the first powder add water, mixing the basic mix, coupled with the liquid material with an electric mixer Stir to construction. 
 4 Tu: the primer is dry, then the standard ingredients in the coating, the coating should be vertical, coating interval should be above the coated non-stick feet shall prevail. 
 Table coating: While coating hard work can be painted table. 
 Amount of reference: the coating thickness of 1mm, with about 1.50 ~ 1.6kg/m2. 
 Packing: liquid material: iron drum 20kg / barrel; powder: (4 × 5) kg / box